revision 11/30/2011 www.phihong.com 15 watt fixed wall plug series psa15a-pv adapter meets level v requirements features ? limited power source ? class ii double insulated ? class b emi ? high efficiency ? level v compliant ? low cost applications ? wireless communications ? portable equipment ? peripherals ? pda safety approvals ? cul/ul mechanical characteristics ? length: 71.7mm (2.82in) ? height: 33.2mm (1.31in) ? width: 50mm (1.97in) ? weight: 145g (5.12oz) output specifications (1) measured after 30 minutes with by-pass capacitors o.1uf/10uf at output connector te rminal and oscilloscope set at 20mhz. (2) special order item. minimum order quantity re quired. please consult phihong usa sales. phihong is not responsible for any error, and reserves the right to make changes without notice. please visit our website at ww w.phihong.com for the most up-to-date specifications and contact information. model dc output voltage load ripple (1) regulation efficiency min. max. p-p (max.) line & load level psa15a-050pv (2) 5v 0a 3.0a 50mv 5% psa15a-060pv (2) 6v 0a 2.5a 60mv 5% psa15a-075pv (2) 7.5v 0a 2.14a 75mv 5% psa15a-090pv (2) 9v 0a 1.66a 90mv 5% psa15a-120pv (2) 12v 0a 1.25a 120mv 5% psa15a-150pv (2) 15v 0a 1.0a 150mv 5% PSA15A-240PV (2) 24v 0a 0.62a 240mv 5% psa15a-480pv (2) 48v 0a 0.31a 480mv 5%
psa15a-pv characteristics www.phihong.com input: ac input voltage rating 100 to 240v ac ac input voltage range 90 to 264v ac ac input frequency 47 to 63hz input current 0.5a (rms) maximum at 120v ac 0.25a (rms) maximum at 240v ac leakage current 0.25ma maximum at all line conditions inrush current <30a for 120v ac at maximum load <60a for 240v ac at maximum load (cold start at ambient 25c) input power saving 0.5w maximum at no load output: efficiency meets requirements for level v marking environmental: temperature operation 0 to +40c non-operation -25 to +75c humidity 20 to 90% emissions fcc class b en55022 class b immunity iec61000-4-2 iec61000-4-3 iec61000-4-4 iec61000-4-5 iec61000-4-6 iec61000-4-8 iec61000-4-11 en61000-3-2 hold-up time 10ms minimum at 120v ac and maximum load over-voltage protection zener clamping if voltage exceeds 120% of limit over-current protection output equipped with short circuit protection ? auto- restart short-circuit protection output can be shorted without damage dielectric withstand (hi-pot) test primary to secondary: 3000v ac for 1 min., 10ma primary to f.g.: 1500v ac for 1 min., 10ma dc output connector 2.1 x 5.5mm center positive barrel dimension diagram unit: mm (inch)
|
